=========
DIFB_0001
=========

- If possible, please include graphics that illustrate the locations of each
  sensor listed in the temperature tables.  This includes the instrument 
  platform sensor and the four solar wing sensors.

The following are outstanding questions for the data provider (Don Hampton)
which should be answered before these data are archived:

- Do the 100-byte image headers include any of the TIB temperatures
  found in the tables you provided?  Or, do those values come only
  from the instruments' electronics telemetry boards?

- HRI CCD A & B sensor(s):  Are these physically two different sensors
  or are the measurements from one physical sensor sent to both side A
  and B of the TIB?

- MRI CCD A & B sensor(s):  Are these physically two different sensors
  or are the measurements from one physical sensor sent to both side A
  and B of the TIB?

- HRI TEL A & B sensor(s):  Are these physically two different sensors
  or are the measurements from one physical sensor sent to both side A
  and B of the TIB?

- Is the HRI SIM Prism 1 sensor for the CaF2 prism?

- Is the HRI SIM Prism 2 sensor for the ZnSe prism?

- Which panels are solar wings 1 and wing 2?  Looking directly at
  the instrument platform with up in the direction of the HGA and
  down looking out the ITS instrument, is the wing on the left or
  right called wing 1 for these temperatures?

- Which directions are +/-Z in the definitions for the four solar
  wing temps?   Does +Z point to the sun or the target (generally),
  assuming Z is normal to the flat panels.

- Was the sensor for the beamsplitter attached to TIB side A or B?
  One spreadsheet I have, ?, states A but the DI Thermal Control
  Subsystem Description report (DI-INST-THR-030-REVA) states B.

- Do we know why some of the paired temps, such as MRI CCD A and B
  varied by as much as one deg C during flight?