Liens for New Horizon LEISA data sets (Dec 2016 peer review) ------------------------------------------------------------ * Last updated 2016-12-14 by SBN:T.Barnes and SBN:S.Protopapa Certification Status: Certified, minor liens to resolve. Issues with spectral resolving power and wavelength assignment. The lambda/delta-lambda from extension number 1 of the FITS file is what I used; this results in values of 220 and 425 for low- and high resolution segments and it is constant across the full wavelength range. The obtained values are distinctly lower than those reported in the SSR (240 and 560 for the low resolution and high resolution segments respectively). Furthermore as shown in REUTERETAL2008 the resolving power is not constant across the full wavelength range (see figure 8 in REUTERETAL2008). Therefore extension 1 of the LEISA FITs data needs to be revised. Specifically, the delta-lambda data in extension 1 needs to be corrected. In the file 'introdoc.pdf' in the main LEISA folder, the resolving power is reported equal to 280 and 580 respectively. These values are not in agreement with those reported in REUTERETAL2008 and need to be corrected. The '.../calib/initial/wavemap.fit' file is not in agreement with extension 1 of the LEISA FITs data. It is indeed reversed with respect to what is expected. It looks like the wavemap is from an earlier calibration, but it should be updated and be made consistent with what's in extension 1 of the FITS files. Missing a number of definitions for acronyms Suggest for P3 delivery adding file that contains the list of the predicted center of target/location for the scans. Or add scan direction and speed to labels. To be discussed between Silvia P. and NH team. From V1.0 to V2.0 of the PC data sets, the target changed from EARTH to STAR or N/A for some files. Examples found in 'data/2007071*/'. Double check that this is correct. If they are correct, a note should be added to the dataset.cat file. directory: 'calib/' --> Remove the superseded calibration files. Please only provide the current ones used for the current version of the data set. --> Check orientation of all surviving calibrations files. file: 'catalog/dataset.cat' --> starting at line 47: "- Uranus with MVIC at phase angles not available from Earth " (and Neptune next line) what phase angles? --> line 55 - what is SIA? (it is defined in line 76) --> acronyms: CODMAC file: 'catalog/leisa.cat' --> Some acronyms not defined: FOV, MVIC TDI channels, IFOV, LVF, SSR1, CDH1 (likely more) --> line 257: "The LEISA ApIDs, the algorithm, and whether the data are stored on SSR1 by CDH1 or on SSR2 by CDH 1 are shown in the following table:" I assume they mean "SSR2 by CDH2" according to the table that follows this line. files: 'data/*/*.lbl' --> The BODY_POLE_CLOCK_ANGLE needs to be double checked. --> typo (**emphasis** added): "Ephemeris time and quaternion **fo** each frame". "fo" => "for" file: 'document/leisa_window_pluto.csv' --> This windowing summary csv file needs to be included in the pluto cruise data set as well. file: 'document/leisa_window_pluto.lbl' --> line 29: actual phase name wasn't inserted. typo: "$(phaseUC)s" file: 'document/ralph_ssr.pdf' --> Reconcile quoted dispersion from REUTERETAL2008 with second plane of wavelength map extension (#1). Figure 8 in SSR should be reproducible. Check the delta wavelength in extension 1 of LEISA. LEISA lien that may apply across the board. file: 'document/samples/leisa_samples.lbl' --> lines 71-80 are repetitive: (note this is true for all lbl files in the document/samples folder for all four LEISA datasets file: 'document/stis_solar.lbl' --> line 44: type "specturm" should be "spectrum" : Multiply by a target's geometric albedo specturm, and divide by r (AU; file: 'NOTES/introdoc.pdf' --> line 1: "[instrument]" appears that it should be filled in with the appropriate instrument. --> line 2: typo "here tfor" --> Directory section line 4 typo: " SuBtracted". line 5: EDR and RDR acronyms not defined. --> Data File contents acronyms EDU, ICD not defined.