ro_pdsdd.ful
- The value is unknown, and vtool gives error:
  STATUS_TYPE = PSA-APPROVED
- Line 214: "FLASE" should be "FALSE"
- These keywords exceed the max of 30 characters
  ROSETTA:BAD_PIXEL_REPLACEMENT_GROUND_FLAG
  ROSETTA:GEOMETRIC_DISTORTION_CORRECTION_FLAG
  ROSETTA:REFLECTIVITY_NORMALIZATION_FLAG
  ROSETTA:INFIELD_STRAYLIGHT_CORRECTION_FLAG
  ROSETTA:OUTFIELD_STRAYLIGHT_CORRECTION_FLAG
- These keywords need to add these additional standard values:
  "ROSETTA:ADC_ID": "TANDEM"
  "ROSETTA:DATA_ROUTING_ID": "QUEUE4"
  "ROSETTA:ERROR_TYPE_ID": "SHUTTER_ERROR_NONE"
  "ROSETTA:HARDWARE_BINNING_ID": "1x1", "4x4". Values should be all caps.



10.ro-c-miro-3-prl-67p-v3.0/index/index.lbl
- VOLUME_ID is missing. It is required as a column or, if all files have
the same value, as a keyword. 
This applies to all MIRO data sets.


10.ro-c-miro-3-prl-67p-v3.0/label/cts_level_3_format.fmt 
- Columns 11 and 13 use value -999.0 to indicate something anomalous.
We suggest adding keyword INVALID_CONSTANT or MISSING_CONSTANT on top
of what's written in DESCRIPTION which describes invalid value.



30.ro-c-osinac-2-esc1-67pchuryumov-m12-v2.1/.../*.lbl
- Values of keywords should be all capitalized. This goes for FILTER_NAME
  FFP-Vis_Blue
  FFP-Vis_Green
  FFP-Vis_Hydra
  FFP-Vis_Orange
  Ortho_FFP-IR
  FFP-Vis_Red
  Ortho_Blue
  Near-IR_FFP-IR
  Neutral_Hydra
PRODUCER_INSTITUTION_NAME:
  "Max Planck Institute for Solar System Research"
- ROSETTA:POINT_OF_INTEREST = "IMAGE_CENTER" should be "IMAGE CENTER" (no _)

30.ro-c-osinac-2-esc1-67pchuryumov-m12-v2.1/data/fit/n20150204t104600614id20f22.lbl
- The object in this image is large enough to see that NASAView shows
a different orientation from fv. If these lines change from
    LINE_DISPLAY_DIRECTION                    = DOWN
    SAMPLE_DISPLAY_DIRECTION                  = LEFT
to
    LINE_DISPLAY_DIRECTION                    = UP
    SAMPLE_DISPLAY_DIRECTION                  = RIGHT
the orientations will match.
It appears that all up, down, left, right orientations are questionable for all the NAC images.



33.ro-c-osiwac-2-esc1-67pchuryumov-m12-v2.1/.../*.lbl
- Values of keywords should be all capitalized. This goes for FILTER_NAME
  Empty_OI
  Empty_UV375
  Empty_VIS610
  Empty_NH2
  OH_Empty
  Empty_Red
  Empty_CN


33.ro-c-osiwac-2-esc1-67pchuryumov-m12-v2.1/data/fit/w20150123t052941762id20f18.lbl 
NASAView shows a different orientation from fv. If these lines change from
    LINE_DISPLAY_DIRECTION                    = DOWN
    SAMPLE_DISPLAY_DIRECTION                  = RIGHT
to
    LINE_DISPLAY_DIRECTION                    = UP
    SAMPLE_DISPLAY_DIRECTION                  = RIGHT
the orientations will match.
It appears that all up, down orientations are questionable for all the WAC images.



40.ro-x-rpcica-2-cvp2-raw-v2.0/voldesc.cat
52.ro-e-rpcica-2-ear3-raw-v1.0/voldesc.cat
54.ro-a-rpcica-2-ast2-raw-v1.0/voldesc.cat
- VOLUME_ID should uniquely identify a volume, but these three all have
  VOLUME_ID = "ROICA_0999"
It appears that the latter two should be _1007 and _1008



40.ro-x-rpcica-2-cvp2-raw-v2.0/document/ica_eaicd/ica_eaicd.lbl
- Line 7:
  ^PNG_DOCUMENT = ("ICA_EAICD004.PNG",... )
should be
  ^PNG_DOCUMENT = {"ICA_EAICD004.PNG",... }


40.ro-x-rpcica-2-cvp2-raw-v2.0/data/edited/2004/sep/d23/rpcica040923t06_000_l2.lbl 
- Line 136 (for COLUMN with NAME = QUALITY)
  BYTES = 9 should be 8



41.ro-x-rpcica-3-cvp2-calib-v1.0/data/.../*.lbl
- The referenced files are not in document/
  ^ARCHIVE_CONTENT_DESC = "EAICD.PDF"
  ^RPC_SCIENCE_USAGE_DESC = "RPC_USER_GUIDE.PDF"



73.ro-c-rpcica-3-ext3-calib-v1.0/data/calibrated/2016/sep/d14/rpcica160914t11_000_l3.lbl
- For the last column, near the bottom of the file (edited)
  NAME          = FLUX
  START_BYTE    = 57
  ITEMS         = 96
  MISSING_CONSTANT = 9.999E99
In the data file, the first two items have value 9.999E+99, but the
next ninety-four have 0.000E+00. Are the correct?



80.ro-c-rpcies-4-esc1-v1.0/
- Many subdirs (e.g. catalog/) and files (e.g. voldesc.cat) missing


80.ro-c-rpcies-4-esc1-v1.0/data/.../*.lbl
- The referenced files are not in document/
  ^EAICD_DESC = "10991-IES-EAICD-04.PDF"
  ^IES_MODES  = "IES_MODES.PDF"