October 2018 New Horizons ALICE KEM Cruise 1 Raw/Calibrated Liens ================================================================= Certification Status: Certified, with minor liens. START/STOP_TIME --> It was noted that for some instruments that there may be an overlap of data between the Pluto Encounter and the KEM mission phases. It was decided during the review to have the data live in the current KEM data sets. But please document in the dataset.cat and nh_kem.cat file of this fact, where it occurs, and ensure the START/STOP_TIME values are correct in the dataset.cat file. There is a problem with the use of TARGET_NAME = "CALIBRATION" obscuring the actual target observed, especially in cases where the calibration target is cited as being important. There are three proposed solutions: 1) use TARGET_NAME for the actual target observed. Note PDS target catalog files will have to be created. 2) use TARGET_NAME = CALIBRATION but define the actual target in TARGET_DESC 3) use TARGET_NAME = CALIBRATION but create mission keyword that defines what the target was. file: catalog/alice.cat --> Does not mention MU69 as next target of NH mission; instead it refers to “Kuiper Belt objects”. file: catalog/dataset.cat --> CONFIDENCE_LEVEL_NOTE "Review" section: consider making this statement generic, change from “certified for scientific use on TBD.” to “certified for scientific use by the PDS.” --> -2- and -3- dataset.cat effectively the same file. Descriptions are very generic and do not contain any specific discussion of these particular data. --> ABSTRACT_DESC: In the first paragraph they call this mission phase "Kuiper Belt cruise 1 mission phase", but in the data files, they call it "CRUISE TO FIRST KBO ENCOUNTER". Should be consistant. --> ABSTRACT_DESC: Please specify the actual date range of the data found in the data set, or that could be found within the dataset. Currently they specify when data was downlinked, or that data is found between START_TIME and STOP_TIME (which should be replaced with actual values). --> In CONFIDENCE_LEVEL_NOTE: DOCUMENT/SEQ_LORRI_PLUTO.TAB is mentioned, but this document does not exist yet. Update this text. --> Line 83: “A list of these sequences has been provided in file DOCUMENT/SEQ_ALICE_PLUTO.TAB.” but there’s no such file… This is probably a leftover from the Pluto encounter phase. Since SEQ_ALICE_PLUTO.TAB refers to Pluto encounter, remove mention to it in Catalog/dataset.cat. --> Line 472: “The quantum efficiencies of the photocathode- coated surfaces are about an order of magnitude more sensitive to sensitive to H Lya wavelengths than the bare, uncoated MCP glass”. Delete repeated "sensitive to." --> Lines 55: “It includes functional testing during the wakeup check from hibernation, high voltage (HV) dark tests, Lyman-Alpha upstream and downstream measurements, InterPlanetary Medium (IPM) upstream and downstream measurements”. But then in line 548: “It includes Lyman-alpha Sky and Interplanetary Medium observations”. Lyman-Alpha and InterPlanetary are spelled differently. But, most of all, the Lyman-Alpha emission, too, comes from the Interplanetary medium. Maybe the team meant “Helium from Interplanetary Medium”? --> Lines 52: “The first Kuiper Belt cruise 1 dataset delivery for the P-Alice instrument covers the data that had been downlinked to the ground by 12/31/2017”. But then in line 543: “This data set includes data downlinked between 10/26/2016 and 12/31/2017.” Maybe the starting date could be added to the sentence in line 52. file: catalog/nh.cat --> Remove from these KEM data sets. Provide updated copy to PDS for ingestion. --> There is a reference to a missing note in both raw and calibrated folders: “4 These mission phase dates and/or designations are still under consideration and will most likely change in future versions of this mission catalog.” It should be deleted because note 4 refers to KEM phase. file: catalog/nh_kem.cat --> MISSION_DESC should unambiguously give the values of MISSION_PHASE_NAME. It currently has: =================== Full MISSION_PHASE_NAME, Short name Start(1,3) Stop(2,3) plus optional Description ---------- ---------- --------- ------------------------- KEMCRUISE1 2016-10-26 2018-08-14 KEM CRUISE1, KBO1 CRUISE, Pluto-KBO1 Cruise, Kuiper belt Extended Mission (KEM) first cruise (4) KEM1 2018-08-14 TBD KEM1 ENCOUNTER, KBO1 ENCOUNTER, KBO1 approach, flyby, post-encounter (4) =================== --> --> Please make it clear what the valid values being used for MISSION_PHASE_NAME are. Note that all values should be in all caps. --> --> Note that none of the values above are currently being used in a data set. It is okay to list future values, but the current value is also needed. --> --> Please add "CRUISE TO FIRST KBO ENCOUNTER" in the table above --> Missing acronyms: (KB) for Kuiper Belt, (KBO) for Kuiper Belt Object. --> "Characterize regolity scattering properties of MU69 and any satellites and rings." Change "regolity" to "regolith". --> Worth mentioning the ambiguity of the start_date (and overlap of data between prior mission phase) for some instruments. --> line 225, regolith misspelled. --> typo in kem1 cruise phase disc: "The name and times chose for this mission phase" (chosen) --> There is a reference to a missing note in both raw and calibrated folders: “4 These mission phase dates and/or designations are still under consideration and will most likely change in future versions of this mission catalog.” It should be deleted because note 4 refers to KEM phase. files: data/*/*.lbl --> MISSION_NAME: Change value from "NEW HORIZONS" to "NEW HORIZONS KUIPER BELT EXTENDED MISSION" file: document/docinfo.txt --> aareadme_bu.txt listed here not included in the directory. file: document/nh_met2utc.lbl & nh_met2utc.tab --> These files need to be updated to include the current data. The last entry in the tab file is on January 2, 2016. Data should continue through the time covered by the data submitted in this archive. --> Suggestion: converts MET to date (neat, but wouldn’t it be better if they included a routine? Times are provided every 500,000 seconds...) file: document/seq_rex_*.* --> Please add these files as was done for PC and PE mission phases. file: index/index.lbl & index.tab --> This Level 3 index file looks odd to me. In the label description only describes the option for “Level 1” or “Level 2”, despite this being a Level 3 archive. In the table files are listed the “Level 2”; however, the names of the data files described in the table are the Level 3 file names. I checked the Level 2 archive. The Level 2 table shows “Level 1” in the field and Level 2 file names are shown. --> --> Edit the column DESCRIPTION to reflect what these values mean and/or what standard they are using. For instance these might signify CODMAC level (not in NH case). You can also just state that Level 1 mean raw data, and Level 2 means calibrated, or what ever the case actually may be. file: index/slimindx.tab --> Suggestion: If the actual target is not specified here (i.e. CALIBRATION vs RHO LEO), please add a new column to specify it. file: -3-/index/slimindx.tab --> Spectra are not in sequential order. Rearrange the order of the list. file: index/indxinfo.txt --> mentions "SLIMINDX.TAB - Narrow version of INDEX.TAB, less than 80-columns wide." but SLIMINDX.TAB is really 85 characters wide. file: 'voldesc.cat' --> DESCRIPTION: In the first paragraph they call this mission phase "Kuiper Belt cruise 1 mission phase", but in the data files, they call it "CRUISE TO FIRST KBO ENCOUNTER". Should be consistant. --> VOLUME_SET_NAME: Values must be in all caps. Last edited by SBN:B.Hirsch and SBN:T.Barnes on 2018-10-19