October 2018 New Horizons SWAP KEM Cruise 1 Raw/Calibrated Liens ================================================================ Certification Status: Certified, with minor liens. START/STOP_TIME --> It was noted that for some instruments that there may be an overlap of data between the Pluto Encounter and the KEM mission phases. It was decided during the review to have the data live in the current KEM data sets. But please document in the dataset.cat and nh_kem.cat file of this fact, where it occurs, and ensure the START/STOP_TIME values are correct in the dataset.cat file. file: catalog/dataset.cat --> line 61: sppacecraft -> spacecraft --> lines 494,495: consider making this statement generic, change from “certified for scientific use on TBD.” to “certified for scientific use by the PDS.” --> -2- and -3- dataset.cat effectively the same file. Descriptions are very generic and do not contain any specific discussion of these particular data. --> ABSTRACT_DESC: In the first paragraph they call this mission phase "Kuiper Belt cruise 1 mission phase", but in the data files, they call it "CRUISE TO FIRST KBO ENCOUNTER". Should be consistant. --> ABSTRACT_DESC: Please specify the actual date range of the data found in the data set, or that could be found within the dataset. Currently they specify when data was downlinked, or that data is found between START_TIME and STOP_TIME (which should be replaced with actual values). --> In CONFIDENCE_LEVEL_NOTE: DOCUMENT/SEQ_LORRI_PLUTO.TAB is mentioned, but this document does not exist yet. Update this text. file: catalog/nh.cat --> Remove from these KEM data sets. Provide updated copy to PDS for ingestion. --> There is a reference to a missing note in both raw and calibrated folders: “4 These mission phase dates and/or designations are still under consideration and will most likely change in future versions of this mission catalog.” It should be deleted because note 4 refers to KEM phase. file: catalog/nh_kem.cat --> MISSION_DESC should unambiguously give the values of MISSION_PHASE_NAME. It currently has: =================== Full MISSION_PHASE_NAME, Short name Start(1,3) Stop(2,3) plus optional Description ---------- ---------- --------- ------------------------- KEMCRUISE1 2016-10-26 2018-08-14 KEM CRUISE1, KBO1 CRUISE, Pluto-KBO1 Cruise, Kuiper belt Extended Mission (KEM) first cruise (4) KEM1 2018-08-14 TBD KEM1 ENCOUNTER, KBO1 ENCOUNTER, KBO1 approach, flyby, post-encounter (4) =================== --> --> Please make it clear what the valid values being used for MISSION_PHASE_NAME are. Note that all values should be in all caps. --> --> Note that none of the values above are currently being used in a data set. It is okay to list future values, but the current value is also needed. --> --> Please add "CRUISE TO FIRST KBO ENCOUNTER" in the table above --> Missing acronyms: (KB) for Kuiper Belt, (KBO) for Kuiper Belt Object. --> "Characterize regolity scattering properties of MU69 and any satellites and rings." Change "regolity" to "regolith". --> Worth mentioning the ambiguity of the start_date (and overlap of data between prior mission phase) for some instruments. --> line 225, regolith misspelled. --> typo in kem1 cruise phase disc: "The name and times chose for this mission phase" (chosen) --> There is a reference to a missing note in both raw and calibrated folders: “4 These mission phase dates and/or designations are still under consideration and will most likely change in future versions of this mission catalog.” It should be deleted because note 4 refers to KEM phase. file: catalog/swap.cat --> The files SWAP_CAL.* are in the DOCUMENT directory directly, not in a separate SWAP subdirectory as described. --> "The SWAP experiment detects atmospheric escape from Pluto as a change in the solar wind caused by the interaction of the Pluto atmosphere with the solar wind." Since this is the kem data set where the New Horizons spacecraft has already passed Pluto, should this text not be either updated to reflect the New object or removed from the Operational Considerations? directory: data/ --> Note the following duplicate data found here that was in Pluto Encounter data set. There should not be duplication of data. --> --> 20161026_033972/swa_0339724800_0x585_*.fit --> --> 20161028_033989/swa_0339897600_0x585_*.fit --> --> 20161029_033998/swa_0339984000_0x585_*.fit files: 'data/*/*.lbl' --> MISSION_NAME: Change value from "NEW HORIZONS" to "NEW HORIZONS KUIPER BELT EXTENDED MISSION" file: document/docinfo.txt --> aareadme_bu.txt listed here not included in the directory. file: document/nh_met2utc.lbl & nh_met2utc.tab --> These files need to be updated to include the current data. The last entry in the tab file is on January 2, 2016. Data should continue through the time covered by the data submitted in this archive. --> Suggestion: converts MET to date (neat, but wouldn’t it be better if they included a routine? Times are provided every 500,000 seconds...) file: document/seq_swap_*.* --> Please add these files as was done for PC and PE mission phases. file: document/swap_cal.pdf --> Formula for RPA Voltage as a function of Azimuth Angle formatted incorrectly with unknown math symbols, negative angles. --> Since you have to touch this file to fix the previous equation description, I would cite the instrument reference at the first instance. Say something like: the instrument paper is included in the document directory in the file swap_ssr.pdf. --> Rudy found a typo in equation labelled (2) on page 2 (replace | with -). Note: Equation labelled (1) on page 3. --> Page 1 refers to figure 29 of SSR paper (instrument response) but plot is found on page 4. This document is trimmed down from more detailed documents and some of the order of presentation is different, but the figures and tables retain the numbering from the original doc. There are a few tables that are not numbered and have no captions. file: document/traj/trajinfo.txt --> This file needs to be updated to (1) extend the TRAJ_2006_2015_1D.TAB file to include the correct trajectory information and adjust the comments, and (2) remove the files and references to the TRAJ_PLUTO_FLYBY files. file: document/traj/traj_2006_2015_1d.lbl & traj_2006_2015_1d.tab --> These files represent the trajectory of the New Horizons spacecraft and need to be updated to include the data for the time range of submission. file: document/traj/traj_pluto_flyby.lbl & traj_pluto_flyby.tab --> Remove these files from this archive. They are not relevant to the kem dataset. file: index/index.lbl & index.tab --> This Level 3 index file looks odd to me. In the label description only describes the option for “Level 1” or “Level 2”, despite this being a Level 3 archive. In the table files are listed the “Level 2”; however, the names of the data files described in the table are the Level 3 file names. I checked the Level 2 archive. The Level 2 table shows “Level 1” in the field and Level 2 file names are shown. --> --> Edit the column DESCRIPTION to reflect what these values mean and/or what standard they are using. For instance these might signify CODMAC level (not in NH case). You can also just state that Level 1 mean raw data, and Level 2 means calibrated, or what ever the case actually may be. file: index/indxinfo.txt --> mentions "SLIMINDX.TAB - Narrow version of INDEX.TAB, less than 80-columns wide." but SLIMINDX.TAB is really 85 characters wide. file: index/slimindx.tab --> Suggestion: If the actual target is not specified here (i.e. CALIBRATION vs RHO LEO), please add a new column to specify it. file: 'voldesc.cat' --> DESCRIPTION: In the first paragraph they call this mission phase "Kuiper Belt cruise 1 mission phase", but in the data files, they call it "CRUISE TO FIRST KBO ENCOUNTER". Should be consistant. --> VOLUME_SET_NAME: Values must be in all caps. Last edited by SBN:B.Hirsch and SBN:T.Barnes on 2018-10-19