1*.ear-c-multi-*/catalog/mission.cat - mission.cat should be exactly the same for all 8 volumes in this review because all have MISSION_NAME = "COMET 67P OBSERVING CAMPAIGN FOR ROSETTA" - Suggestion: delete MISSION_ALIAS_NAME = "EB", especially if it's not used much elsewhere. The SBN node has much other earth-based data. 1*.ear-c-multi-*/index/ - Files index.lbl and index.tab are required but missing 1*.ear-c-multi-*/voldesc.cat 1*.ear-c-multi-*/index/checksum.lbl - VOLUME_ID exceeds 12-char max, e.g. C67PEB_IFS_L2_1000, C67PEB_SPEC_L2_1000 1a.ear-c-multi-2-67p-ifs-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1a.ear-c-multi-2-67p-ifs-v1.0/voldesc.cat - VOLUME_NAME exceeds max of 60 chars: "COMET 67P GROUND BASED OBSERVATIONS INTEGRAL FIELD SPECTROSCOPY RAW..." 1b.ear-c-multi-3-67p-ifs-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file. 1b.ear-c-multi-3-67p-ifs-v1.0/data/.../*_sci_*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_DATA", "IMAGE_DATA", "HEADER_STATIMAGE", "IMAGE_STAT" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_DATA_HEADER", "DATA_IMAGE", "STATIMAGE_HEADER", "STAT_IMAGE" 1b.ear-c-multi-3-67p-ifs-v1.0/voldesc.cat - VOLUME_NAME exceeds max of 60 chars: "COMET 67P GROUND BASED OBSERVATIONS INTEGRAL FIELD SPECTROSCOPY CALIBRATED..." 1c.ear-c-multi-2-67p-img-v1.0/calib/.../*.lbl 1c.ear-c-multi-2-67p-img-v1.0/data/.../*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_EXT1", "IMAGE_EXT1", "HEADER_IMAGE_EXT2", "IMAGE_EXT2" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "EXT1_PRIMARY_HEADER", "EXT1_IMAGE", "EXT2_IMAGE_HEADER", "EXT2_IMAGE" Perhaps only those files with multiple images have this error, e.g. calib/gemini/south/gmos/2014_11_22/flat/r/s20141122s0255.lbl and data/gemini/south/gmos/2014_11_16/67p/r/s20141116s0027.lbl 1c.ear-c-multi-2-67p-img-v1.0/calib/int/wfc/2016_03_11/bias/r1189996.lbl - Bad value for seconds: PRODUCT_CREATION_TIME = 2016-03-11T18:54:60.0 START_TIME = 2016-03-11T18:54:60.0 1c.ear-c-multi-2-67p-img-v1.0/calib/lowell/31_inch/.../*.lbl 1c.ear-c-multi-2-67p-img-v1.0/data/lowell/31_inch/.../*.lbl - INSTRUMENT_HOST_NAME = "LOWELL OBSERVATORY 31-INCH TELESCOPE" does not match catalog/insthost_lowell31in.cat: INSTRUMENT_HOST_NAME = "LOWELL OBSERVATORY 31-INCH" 1c.ear-c-multi-2-67p-img-v1.0/calib/osn/1500mm_ccd/2015_11_15/bias/bias_b2_20151115_001.lbl & others - RIGHT_ASCENSION = -15.000000 is illegal. The min value is 0. - AIRMASS is set twice, which is illegal. 1c.ear-c-multi-2-67p-img-v1.0/calib/sao_ras/.../*.lbl 1c.ear-c-multi-2-67p-img-v1.0/data/sao_ras/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "SPECIAL ASROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" should be, in order to match catalog/insthost_saobta.cat "SPECIAL ASTROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" 1c.ear-c-multi-2-67p-img-v1.0/calib/wht/liris/2016_01_22/flat/r2311022.lbl & presumably others - Line 82: SAMPLE_TYPE = MSB_INTEGER should probably be IEEE_REAL 1c.ear-c-multi-2-67p-img-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1c.ear-c-multi-2-67p-img-v1.0/catalog/inst_ccdt90.cat - Object INSTRUMENT is missing required object INSTRUMENT_REFERENCE_INFO 1c.ear-c-multi-2-67p-img-v1.0/catalog/insthost_rdlmnot.cat - Presumably INSTRUMENT_HOST_ID = "RDLMLT" should be "RDLMNOT" 1c.ear-c-multi-2-67p-img-v1.0/data/bnao/forero2/2015_11_06/67p/r/comet_20151106_if684_03 - Line 90: SAMPLE_TYPE = MSB_UNSIGNED_INTEGER should probably be IEEE_REAL 1c.ear-c-multi-2-67p-img-v1.0/data/not/alfosc/.../*.lbl - Object IMAGE is missing required elements LINES and LINE_SAMPLES 1c.ear-c-multi-2-67p-img-v1.0/data/not/alfosc/2016_05_23/.../*.lbl - These values are unknown INSTRUMENT_HOST_ID = "NOT" INSTRUMENT_HOST_NAME = "THE NORDIC OPTICAL TELESCOPE" INSTRUMENT_NAME = "NOT ALHAMBRA FAINT OBJECT SPECTROGRAPH AND CAMERA" Presumably, they should match the other alfosc labels INSTRUMENT_HOST_ID = "RDLMNOT" INSTRUMENT_HOST_NAME = "ROQUE DE LOS MUCHACHOS OBSERVATORY 2.56-M NORDIC OPTICAL/INFRARED CASSEGRAIN ALTAZ. TELESCOPE" INSTRUMENT_NAME = "ALHAMBRA FAINT OBJECT SPECTROGRAPH AND CAMERA (ALFOSC)" 1c.ear-c-multi-2-67p-img-v1.0/data/trappist/ccd/2015_12_09/67p/67p_151209_s01_r01_c01_cn.lbl & others - Having no value is illegal. Delete or use UNK or N/A or NULL RIGHT_ASCENSION = /* CRVAL1 header */ DECLINATION = /* CRVAL2 header */ 1c.ear-c-multi-2-67p-img-v1.0/data/vlt/.../*.cat (many, not all) - INSTRUMENT_HOST_NAME is incorrect: "PARANAL OBSERVATORY 8.2M-MELIPAL VERY LARGE TELESCOPE (VLT)-UT3" should be, in order to match catalog/insthost_obs060t3.cat "PARANAL OBSERVATORY 8.2-M MELIPAL VERY LARGE TELESCOPE (VLT)-UT3" 1c.ear-c-multi-2-67p-img-v1.0/voldesc.cat - The files listed as "INST_..." should be "INSTHOST_..." ^INSTRUMENT_HOST_CATALOG = {"INSTHOST_BNAO2M.CAT", "INSTHOST_CAO22M.CAT", "INST_CAO35M.CAT", "INST_DCT.CAT",... 1c.ear-c-multi-2-67p-img-v1.0/data/vlt/fors2/2014_07_20/std/fors2_140721t100321_082_edr.lbl 1c.ear-c-multi-2-67p-img-v1.0/data/vlt/fors2/2014_07_21/std/fors2_140721t100321_082_edr.lbl - These two files share the same PRODUCT_ID, which is illegal "FORS2_140721T100321_082_EDR" 1d.ear-c-multi-3-67p-img-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1d.ear-c-multi-3-67p-img-v1.0/catalog/inst_ccdt90.cat - Object INSTRUMENT is missing required object INSTRUMENT_REFERENCE_INFO 1d.ear-c-multi-3-67p-img-v1.0/catalog/insthost_rdlmnot.cat - Presumably INSTRUMENT_HOST_ID = "RDLMLT" should be "RDLMNOT" 1d.ear-c-multi-3-67p-img-v1.0/data/ca/mosca/.../*.lbl - INSTRUMENT_NAME is incorrect: "MULTIPLE OBJECT SPECTROGRAPH AT CALAR ALTO" should be, in order to match catalog/inst_mosca.cat "MULTIPLE OBJECT SPECTROSCOPY AT CALAR ALTO" - Many, not all, of these files have illegal values: RIGHT_ASCENSION = 24657.29 /* RA header */ DECLINATION = 87854.67 /* DEC header */ 1d.ear-c-multi-3-67p-img-v1.0/data/gemini/south/flamingos2/.../*.lbl - typo: DECSRIPTION should be DESCRIPTION. 3 times in each file. - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_SCI", "IMAGE_SCI", "HEADER_VARIMAGE", ... "IMAGE_DQ" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_SCI_HEADER", "SCI_IMAGE", "VARIMAGE_HEADER", ... "DQ_IMAGE" 1d.ear-c-multi-3-67p-img-v1.0/data/lcogt/ctio/sbig/.../*.lbl (except 2 files) - INSTRUMENT_ID has unknown value "SBIG_CAM". Known values are "SBIG_CAM_70", "SBIG_CAM_71", "SBIG_CAM_74", "SBIG_CAM_76", "SBIG_CAM_78" 1d.ear-c-multi-3-67p-img-v1.0/data/lowell/31_inch/.../*.lbl - INSTRUMENT_HOST_NAME = "LOWELL OBSERVATORY 31-INCH TELESCOPE" does not match catalog/insthost_lowell31in.cat: INSTRUMENT_HOST_NAME = "LOWELL OBSERVATORY 31-INCH" 1d.ear-c-multi-3-67p-img-v1.0/data/lowell/dct/.../*.lbl - INSTRUMENT_NAME has a typo: "LARGE MONOLITHIC IMAGE (LMI)" should be, in order to match catalog/inst_lmi.cat "LARGE MONOLITHIC IMAGER (LMI)" 1d.ear-c-multi-3-67p-img-v1.0/data/neowise/.../*.lbl - These are inconsistent, and the latter is unrecognized INSTRUMENT_HOST_ID = "SPITZER" INSTRUMENT_HOST_NAME = "NEAR-EARTH OBJECT WIDE-FIELD INFRARED SURVEY EXPLORER" catalog/insthost_neowise.cat defines these values INSTRUMENT_HOST_ID = "NEOWISE" INSTRUMENT_HOST_NAME = "NEAR-EARTH OBJECT WIDE-FIELD SURVEY EXPLORER" while catalog/insthost_spitzer.cat defines INSTRUMENT_HOST_ID = "SPITZER" INSTRUMENT_HOST_NAME = "SPITZER SPACE TELESCOPE" - Many, not all, have TELESCOPE_LONGITUDE that exceed max of 180, e.g. TELESCOPE_LONGITUDE = 267.133238 /* GEOLON header */ 1d.ear-c-multi-3-67p-img-v1.0/data/sao_ras/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "SPECIAL ASROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" should be, in order to match catalog/insthost_saobta.cat "SPECIAL ASTROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" 1d.ear-c-multi-3-67p-img-v1.0/data/spitzer/irac/2016_04_08/67p/cbu/ch1/spitzer_i1_1280_11_1_cbunc.lbl 1d.ear-c-multi-3-67p-img-v1.0/data/spitzer/irac/2016_04_30/67p/cbc/ch1/spitzer_i1_2304_14_1__cbcd.lbl 1d.ear-c-multi-3-67p-img-v1.0/data/spitzer/irac/2016_04_30/67p/cbc/ch1/spitzer_i1_2304_17_1__cbcd.lbl - Each points to 1 file that doesn't exist, e.g. ^HEADER = ("R1152920_RDR_02.FIT",1) ^IMAGE = ("R1152920_RDR_02.FIT",6) 1d.ear-c-multi-3-67p-img-v1.0/data/spitzer/irac/2016_04_30/67p/bim/ch2/spitzer_i2_2304_16_1_bimsk.lbl & others - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_DATA", "IMAGE_PRIMARY", "HEADER_SUMPED", ... "IMAGE_SUMSAM" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_DATA_HEADER", "PRIMARY_IMAGE", "SUMPED_HEADER", ... "SUMSAM_IMAGE" - The file pointed to (e.g. DATA_20160204_00326_B.FIT) doesn't exist ^HEADER_PRIMARY_DATA = ("DATA_20160204_00326_B.FIT",1) ^IMAGE_PRIMARY = ("DATA_20160204_00326_B.FIT",4) ... Presumably, the filename should be the same as the label's except for .lbl. Perhaps only those files with multiple images have these errors. 1d.ear-c-multi-3-67p-img-v1.0/data/stella/.../*.lbl - INSTRUMENT_NAME has a typo: "WIDE FIELD STELLA IMAGING PHOTOMETER" should be, in order to match catalog/inst_wifsip.cat "WIDE FIELD STELLA IMAGING PHOTOMETER (WIFSIP)" 1d.ear-c-multi-3-67p-img-v1.0/data/trappist/ccd/2015_12_09/67p/trap_20151209t081246.lbl & others - Having no value is illegal. Delete or use UNK or N/A or NULL RIGHT_ASCENSION = /* CRVAL1 header */ DECLINATION = /* CRVAL2 header */ 1d.ear-c-multi-3-67p-img-v1.0/data/vlt/.../*.lbl - INSTRUMENT_HOST_NAME is incorrect: "PARANAL OBSERVATORY 8.2M-MELIPAL VERY LARGE TELESCOPE (VLT)-UT3" should be, in order to match catalog/insthost_obs060t3.cat "PARANAL OBSERVATORY 8.2-M MELIPAL VERY LARGE TELESCOPE (VLT)-UT3" 1d.ear-c-multi-3-67p-img-v1.0/data/vlt/fors2/.../*.lbl - INSTRUMENT_NAME has a typo: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2" should be, in order to match catalog/inst_fors2.cat: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2 (FORS2)" 1d.ear-c-multi-3-67p-img-v1.0/data/vlt/fors2/2014_07_20/std/fors2_140721t100321_082_rdr.lbl 1d.ear-c-multi-3-67p-img-v1.0/data/vlt/fors2/2014_07_21/std/fors2_140721t100321_082_rdr.lbl - These two files share the same PRODUCT_ID, which is illegal "FORS2_140721T100321_082_RDR" 1d.ear-c-multi-3-67p-img-v1.0/data/wendelstein/2m_tel/wwfi/2015_09_30/67p/r/tv150826____r____150930_205.lbl - Having no value is illegal. Delete or use UNK or N/A or NULL AIRMASS = /* PHAIRMAS header */ 1d.ear-c-multi-3-67p-img-v1.0/voldesc.cat - The files listed as "INST_..." should be "INSTHOST_..." ^INSTRUMENT_HOST_CATALOG = {"INSTHOST_BNAO2M.CAT", "INSTHOST_CAO22M.CAT", "INST_CAO35M.CAT", "INST_DCT.CAT", 1e.ear-c-multi-2-67p-pol-v1.0/calib/sao_ras/.../*.lbl 1e.ear-c-multi-2-67p-pol-v1.0/data/sao_ras/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "SPECIAL ASROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" should be, in order to match catalog/insthost_saobta.cat "SPECIAL ASTROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" 1e.ear-c-multi-2-67p-pol-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1e.ear-c-multi-2-67p-pol-v1.0/catalog/inst_hstacs.cat - These values are flipped, i.e. change INSTRUMENT_ID = "HST" INSTRUMENT_HOST_ID = "HSTACS" to INSTRUMENT_ID = "HSTACS" INSTRUMENT_HOST_ID = "HST" - This catalog file already exists in the EN database with REFERENCE_KEY_ID = "GONZAGAETAL2005" instead of REFERENCE_KEY_ID = "SNODGRASSETAL2017" It's fine to add "SNODGRASSETAL2017" as a second REFERENCE_KEY_ID, but don't delete "GONZAGAETAL2005" 1e.ear-c-multi-2-67p-pol-v1.0/catalog/inst_isis.cat - Lines 18 and 19 are wrong: INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING" SYSTEM, C. 2019" should probably be (assuming the middle " is the error) INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING SYSTEM, C. 2019" 1e.ear-c-multi-2-67p-pol-v1.0/data/vlt/fors2/.../*.lbl - INSTRUMENT_NAME has a typo: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2" should be, in order to match catalog/inst_fors2.cat: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2 (FORS2)" 1f.ear-c-multi-3-67p-pol-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1f.ear-c-multi-3-67p-pol-v1.0/catalog/inst_hstacs.cat - These values are flipped, i.e. change INSTRUMENT_ID = "HST" INSTRUMENT_HOST_ID = "HSTACS" to INSTRUMENT_ID = "HSTACS" INSTRUMENT_HOST_ID = "HST" - This catalog file already exists in the EN database with REFERENCE_KEY_ID = "GONZAGAETAL2005" instead of REFERENCE_KEY_ID = "SNODGRASSETAL2017" It's fine to add "SNODGRASSETAL2017" as a second REFERENCE_KEY_ID, but don't delete "GONZAGAETAL2005" 1f.ear-c-multi-3-67p-pol-v1.0/catalog/inst_isis.cat - Lines 18 and 19 are wrong: INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING" SYSTEM, C. 2019" should probably be (assuming the middle " is the error) INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING SYSTEM, C. 2019" 1f.ear-c-multi-3-67p-pol-v1.0/data/hst/.../crc/*.lbl 1f.ear-c-multi-3-67p-pol-v1.0/data/hst/.../crj/*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_SCI", "IMAGE_SCI", "HEADER_ERRIMAGE", ... "IMAGE_DQ" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_SCI_HEADER", "SCI_IMAGE", "ERRIMAGE_HEADER", ... "DQ_IMAGE" 1f.ear-c-multi-3-67p-pol-v1.0/data/hst/acs_wfc/2016_02_22/67p/ipol/jcz31a010/crj/jcz31a011_crj.lbl and possibly more with multiple images - The pointers to the last two images are wrong ^PRIMARY_SCI_HEADER = ("JCZ31A011_CRJ.FIT",1) ^SCI_IMAGE = ("JCZ31A011_CRJ.FIT",12) ^ERRIMAGE_HEADER = ("JCZ31A011_CRJ.FIT",16760844) ^ERR_IMAGE = ("JCZ31A011_CRJ.FIT",16760846) ^DQIMAGE_HEADER = ("JCZ31A011_CRJ.FIT",33521678) ^DQ_IMAGE = ("JCZ31A011_CRJ.FIT",33521680) The number after the comma is the number of 2880-byte records at which the header or image is found. The first 2 are correct, but the next 4 can't possibly be correct because the .FIT file is only 41947200 bytes. This would be closer ^PRIMARY_SCI_HEADER = ("JCZ31A011_CRJ.FIT",1) ^SCI_IMAGE = ("JCZ31A011_CRJ.FIT",12) ^ERRIMAGE_HEADER = ("JCZ31A011_CRJ.FIT",16760844 ) ^ERR_IMAGE = ("JCZ31A011_CRJ.FIT",16760846 ) ^DQIMAGE_HEADER = ("JCZ31A011_CRJ.FIT",33521678 ) ^DQ_IMAGE = ("JCZ31A011_CRJ.FIT",33521680 ) but the second header starts at byte 16793280, the second image is more than 2 bytes away (probably 2*2880), the third header starts at 33560640, and the third image is more than 2 bytes away. 1f.ear-c-multi-3-67p-pol-v1.0/data/hst/.../flc/*.lbl 1f.ear-c-multi-3-67p-pol-v1.0/data/hst/.../flt/*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_SCI", "IMAGE_SCI", "HEADER_ERRIMAGE", ... "BINTABLE" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_SCI_HEADER", "SCI_IMAGE", "ERRIMAGE_HEADER", ... "BIN_TABLE" - BIN_TABLE needs keywords "INTERCHANGE_FORMAT", "ROW_BYTES", "ROWS", and especially COLUMN. The fits viewer shows 27 columns for the equivalent of BIN_TABLE, so the .lbl should probably have 27 COLUMN objects. 1f.ear-c-multi-3-67p-pol-v1.0/data/sao_ras/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "SPECIAL ASROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" should be, in order to match catalog/insthost_saobta.cat "SPECIAL ASTROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" 1f.ear-c-multi-3-67p-pol-v1.0/data/vlt/fors2/.../*.lbl - INSTRUMENT_NAME has a typo: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2" should be, in order to match catalog/inst_fors2.cat: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2 (FORS2)" - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_DATA", "IMAGE_PRIMARY", "HEADER_IMGERR", "IMAGE_ERR" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_DATA_HEADER", "PRIMARY_IMAGE", "IMGERR_HEADER", "ERR_IMAGE" 1f.ear-c-multi-3-67p-pol-v1.0/voldesc.cat - VOLUME_NAME exceeds max of 60 chars: "COMET 67P GROUND BASED OBSERVATIONS POLARIMETRY CALIBRATED V1.0" 1g.ear-c-multi-2-67p-spec-v1.0/calib/sao_ras 1g.ear-c-multi-2-67p-spec-v1.0/data/sao_ras - INSTRUMENT_HOST_NAME has a typo: "SPECIAL ASROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" should be, in order to match catalog/insthost_saobta.cat "SPECIAL ASTROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" 1g.ear-c-multi-2-67p-spec-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1g.ear-c-multi-2-67p-spec-v1.0/catalog/dataset.cat - Line 129: DATA_SET_HOST "ISIS"/"WHT is listed twice 1g.ear-c-multi-2-67p-spec-v1.0/catalog/inst_isis.cat - Lines 18 and 19 are wrong: INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING" SYSTEM, C. 2019" should probably be (assuming the middle " is the error) INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING SYSTEM, C. 2019" 1g.ear-c-multi-2-67p-spec-v1.0/data/gemini/.../*.lbl - INSTRUMENT_NAME and INSTRUMENT_ID have typos: "GEMINI NEAR-INFRARED SPECTROGRAPH (GNIRS)" "GNIRS" should be, in order to match catalog/inst_gmosn.cat: "GEMINI MULTI-OBJECT SPECTROGRAPH - NORTH (GMOS-N)" "GMOS-N" 1g.ear-c-multi-2-67p-spec-v1.0/data/keck/.../*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_EXT1", "IMAGE_EXT1", "HEADER_IMAGEEXT2", ... "IMAGE_EXT3" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_EXT1_HEADER", "EXT1_IMAGE", "IMAGEEXT2_HEADER", ... "EXT3_IMAGE" 1g.ear-c-multi-2-67p-spec-v1.0/data/gemini/north/gnirs/2015_10_14/std/xd/n20151014s0319.lbl - SAMPLE_TYPE = MSB_INTEGER should probably be IEEE_REAL 1g.ear-c-multi-2-67p-spec-v1.0/data/vlt/fors2/.../*.lbl - INSTRUMENT_NAME has a typo: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2" should be, in order to match catalog/inst_fors2.cat: "FOCAL REDUCER AND LOW DISPERSION SPECTROGRAPH #2 (FORS2)" 1g.ear-c-multi-2-67p-spec-v1.0/data/vlt/uves/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "PARANAL OBSERVATORY 8.2M-KUYEN VERY LARGE TELESCOPE (VLT)-UT2" should be, in order to match catalog/insthost_obs060t2.cat (no hyphen): "PARANAL OBSERVATORY 8.2M KUYEN VERY LARGE TELESCOPE (VLT)-UT2" - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMAR_CCD20", "IMAGE_CCD20", "HEADER_IMAGE_CCD44", "IMAGE_CCD44" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMAR_CCD20_HEADER", "CCD20_IMAGE", "CCD44_IMAGE_HEADER", "CCD44_IMAGE" Half of these files have these errors, perhaps those with multiple images 1g.ear-c-multi-2-67p-spec-v1.0/data/vlt/xshooter/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "PARANAL OBSERVATORY 8.2M-MELIPAL VERY LARGE TELESCOPE (VLT)-UT3" should be, in order to match catalog/insthost_obs060t3.cat: "PARANAL OBSERVATORY 8.2-M MELIPAL VERY LARGE TELESCOPE (VLT)-UT3" 1g.ear-c-multi-2-67p-spec-v1.0/data/wht/acam/.../acq/.../*.lbl - This target is unknown TARGET_NAME = "ACQUISITION" Can you use one of the non-specific targets already defined, e.g. "CALIBRATION", "CHECKOUT", "DEEP SPACE", ... If not, please create a target.cat with your desired TARGET_NAME. 1h.ear-c-multi-3-67p-spec-v1.0/catalog/inst_*.cat - Remove keywords MISSION_NAME and MISSION_ID from the bottom of the file 1h.ear-c-multi-3-67p-spec-v1.0/catalog/dataset.cat - Line 131: DATA_SET_HOST "ISIS"/"WHT is listed twice 1h.ear-c-multi-3-67p-spec-v1.0/catalog/inst_isis.cat - Lines 18 and 19 are wrong: INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING" SYSTEM, C. 2019" should probably be (assuming the middle " is the error) INSTRUMENT_NAME = "INTERMED-DISP SPECTROGRAPH AND IMAGING SYSTEM, C. 2019" 1h.ear-c-multi-3-67p-spec-v1.0/data/irtf/.../*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_DATA", "IMAGE_PRIMARY", "HEADER_SUMPED", ... "IMAGE_SUMSAM" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_DATA_HEADER", "PRIMARY_IMAGE", "SUMPED_HEADER", ... "SUMSAM_IMAGE" Half of these files have these errors, perhaps those with multiple images 1h.ear-c-multi-3-67p-spec-v1.0/data/keck/hires/2015_12_26/67p/hrs0622_2.lbl - PRODUCT_ID = "HRS0621_2" collides with another PRODUCT_ID. Presumably, this should be "HRS0622_2" 1h.ear-c-multi-3-67p-spec-v1.0/data/lt/lotus/2015_12_*/.../*.lbl 1h.ear-c-multi-3-67p-spec-v1.0/data/lt/lotus/2016*/.../*.lbl - As covered by Section 12.1.2 of the PDS3 Standards, object names "HEADER_PRIMARY_DATA", "IMAGE_PRIMARY", "HEADER_LSS_NONSS",... "IMAGE_SPEC_SS" should be reversed so that the suffix not the prefix is one of the objects listed in Chapter 4 of the PDS3 Standards, i.e. presumably "PRIMARY_DATA_HEADER", "PRIMARY_IMAGE", "LSS_NONSS_HEADER",... "SPEC_SS_IMAGE" Half of these files have these errors, perhaps those with multiple images 1h.ear-c-multi-3-67p-spec-v1.0/data/sao_ras/.../*.lbl - INSTRUMENT_HOST_NAME has a typo: "SPECIAL ASROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" should be, in order to match catalog/insthost_saobta.cat "SPECIAL ASTROPHYSICAL OBSERVATORY 6-M LARGE ALTAZIMUTH TELESCOPE (BTA)" 1h.ear-c-multi-3-67p-spec-v1.0/voldesc.cat - VOLUME_NAME exceeds max of 60 chars: "COMET 67P GROUND BASED OBSERVATIONS SPECTROSCOPY CALIBRATED V1.0" 2*.ro-c-osi*/browse/... 2*.ro-c-osi*/data/... - Values of keywords should be all caps. PRODUCER_INSTITUTION_NAME = "Max Planck Institute for Solar System Research" FILTER_NAME = "FFP-UV_Far-UV", "FFP-UV_Near-UV", "Ortho_FFP-IR", ... Perhaps use the existing value in the PDS3 data dictionary "MAX PLANCK INSTITUT FUER SONNENSYSTEMFORSCHUNG" - ROSETTA:POINT_OF_INTEREST = "IMAGE_CENTER" should be ROSETTA:POINT_OF_INTEREST = "IMAGE CENTER" - ROSETTA:HARDWARE_BINNING_ID = "1x1" should be "1X1" - ROSETTA:HARDWARE_BINNING_ID = "2x2" should be "2X2" - ROSETTA:HARDWARE_BINNING_ID = "4x4" should be "4X4" - ROSETTA:HARDWARE_BINNING_ID = "8x8" should be "8X8" - ROSETTA:ADC_ID = "TANDEM" is a new value. Probably modify ro_pdsdd.ful - ROSETTA:DATA_ROUTING_ID "QUEUE4" is new value. Probably modify ro_pdsdd.ful - ROSETTA:ERROR_TYPE_ID "SHUTTER_ERROR_NONE" is new. Probably modify ro_pdsdd.ful - Do these groups have an accompanying GENERIC_GROUP_DEFINITION? "IMAGE_POI" "SCIENCE_ACTIVITY" "SR_ACQUIRE_OPTIONS" "SR_COMPRESSION" "SR_DATA_CONTENT" "SR_HARDWARE_CONFIG" "SR_HEATER_STATUS" "SR_MECHANISM_STATUS" "SR_POWER_STATUS" "SR_PROCESSING_FLAGS" "SR_RADIATION_STATUS" "SR_SHUTTER_CONFIG" "SR_SHUTTER_STATUS" "SR_STATUS_FLAGS" "SR_SWITCH_STATUS" "SR_TEMPERATURE_STATUS" If not, append "_PARAMETERS" to each, as shown in the PDS3 Standards, section 13.2 2a.ro-c-osinac-4-esc1-67p-m12-infldstr-v0.1/data/fit/n20150209t163142607id4ef22.lbl 2a.ro-c-osinac-4-esc1-67p-m12-infldstr-v0.1/data/img/n20150209t163142607id4ef22.img - For NASAView (which views PDS3 labels) to match fv (for .fit), change LINE_DISPLAY_DIRECTION = DOWN SAMPLE_DISPLAY_DIRECTION = LEFT to LINE_DISPLAY_DIRECTION = UP SAMPLE_DISPLAY_DIRECTION = RIGHT 2b.ro-c-osinac-4-esc1-67p-m12-inf-refl-v0.1/data/fit/n20150209t210951552id4ff22.lbl 2b.ro-c-osinac-4-esc1-67p-m12-inf-refl-v0.1/data/img/n20150209t210951552id4ff22.img - For NASAView (which views PDS3 labels) to match fv (for .fit), change LINE_DISPLAY_DIRECTION = DOWN SAMPLE_DISPLAY_DIRECTION = LEFT to LINE_DISPLAY_DIRECTION = UP SAMPLE_DISPLAY_DIRECTION = RIGHT 2c.ro-c-osiwac-4-esc1-67p-m12-infldstr-v0.1/data/img/w20150201t111603518id4ef18.img 2c.ro-c-osiwac-4-esc1-67p-m12-infldstr-v0.1/data/fit/w20150201t111603518id4ef18.lbl - For NASAView (which views PDS3 labels) to match fv (for .fit), change LINE_DISPLAY_DIRECTION = DOWN to LINE_DISPLAY_DIRECTION = UP Note, the PDS3 labels already had SAMPLE_DISPLAY_DIRECTION = RIGHT 2d.ro-c-osiwac-4-esc1-67p-m12-inf-refl-v0.1/data/fit/w20150119t211034411id4ff13.lbl 2d.ro-c-osiwac-4-esc1-67p-m12-inf-refl-v0.1/data/img/w20150119t211034411id4ff13.img - For NASAView (which views PDS3 labels) to match fv (for .fit), change LINE_DISPLAY_DIRECTION = DOWN to LINE_DISPLAY_DIRECTION = UP Note, the PDS3 labels already had SAMPLE_DISPLAY_DIRECTION = RIGHT 3a.ro-c-rpclap-5-prl-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3b.ro-c-rpclap-5-esc1-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3c.ro-c-rpclap-5-esc2-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3d.ro-c-rpclap-5-esc3-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3e.ro-c-rpclap-5-esc4-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3f.ro-c-rpclap-5-ext1-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3g.ro-c-rpclap-5-ext2-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 3h.ro-c-rpclap-5-ext3-deriv2-v1.0/index/browse_index.lbl - BROWSE_INDEX_TABLE should contain keyword INDEX_TYPE. 4*.ro-c-rsi-1_2_3-*/browse/*lbl - These have ENCODING_TYPE = "JPEG", which is illegal. ENCODING_TYPE is meant for data, and JPEG is not such a format. Instead of OBJECT = BROWSE_IMAGE ENCODING_TYPE = JPEG use OBJECT = DOCUMENT DOCUMENT_FORMAT = JPG 4c.ro-c-rsi-1_2_3-prl-1539-v1.0/data/level1a/.../*.lbl - Keyword DSN_STATION_NUMBER is set twice, which is illegal 4d.ro-c-rsi-1_2_3-esc1-1554-v1.0/data/level1a/.../*.lbl - Keyword DSN_STATION_NUMBER is set twice, which is illegal 4e.ro-c-rsi-1_2_3-esc1-1555-v1.0/data/level1a/.../*.lbl - Keyword DSN_STATION_NUMBER is set twice, which is illegal 4f.ro-c-rsi-1_2_3-esc1-1556-v1.0 /data/level1a/.../*.lbl - Keyword DSN_STATION_NUMBER is set twice, which is illegal 5*.ro-x-srem-*/data/*.lbl - MISSION_PHASE_NAME's values come from mission.cat. These aren't there: "ROSETTA EXTENSION 3 MTP034" "ROSETTA EXTENSION 3 MTP035" though "ROSETTA EXTENSION 3" is legal. - Keywords SPACECRAFT_CLOCK_START_COUNT and _STOP_ are required but missing 5a.ro-x-srem-2-ext3-mtp034-v1.0/data/srem_l2_20160926.lbl - Only this file has DATA_SET_ID = "RO-X-SREM-2-EXT3-MTP035-V1.0" while every other label has DATA_SET_ID = "RO-X-SREM-2-EXT3-MTP034-V1.0" 5a.ro-x-srem-2-ext3-mtp034-v1.0/voldesc.cat - Line 30 lacks a closing " - DATA_SET_ID = "RO-C-SREM-2-EXT3-MTP034-V1.0" should be DATA_SET_ID = "RO-X-SREM-2-EXT3-MTP034-V1.0" to match dataset.cat 5b.ro-x-srem-5-ext3-mtp034-v1.0/data/srem_l5_20160926.lbl - Only this file has DATA_SET_ID = "RO-X-SREM-5-EXT3-MTP035-V1.0" while every other label has DATA_SET_ID = "RO-X-SREM-5-EXT3-MTP034-V1.0" 5b.ro-x-srem-5-ext3-mtp034-v1.0/voldesc.cat - Line 30 lacks a closing " - DATA_SET_ID = "RO-C-SREM-5-EXT3-MTP034-V1.0" should be DATA_SET_ID = "RO-X-SREM-5-EXT3-MTP034-V1.0" to match dataset.cat 6*.ro*-virtis/data/*.lbl - MISSION_PHASE_NAME's values come from mission.cat. These aren't there: "COMET ESCORT 1 MTP011" "COMET ESCORT 1 MTP013" "COMET ESCORT 1 MTP013" "PRELANDING MTP006" "PRELANDING MTP007" "PRELANDING MTP008" "PRELANDING MTP009" though "COMET ESCORT 1" and "PRELANDING" are legal. 6a.ro-c-virtis-2-esc1-mtp013-v2.0/data/... - These values are illegal DECLINATION = -999.999 RIGHT_ASCENSION = -999.999 It is legal to replace the value with "NULL", "N/A", or "UNK" - SUFFIX_BYTES = 2 is illegal. It must be 4. - In object QUBE, required keywords are missing: BAND_BIN_CENTER, BAND_BIN_UNIT, BAND_BIN_ORIGINAL_BAND Those sit within a GROUP = BAND_BIN. - Values for non-numeric keywords can't begin with a digit, so INSTRUMENT_MODE_ID = 10 DATA_QUALITY_ID = 1 PROCESSING_LEVEL_ID = 3 ROSETTA:SCAN_MODE_ID = 0 should be INSTRUMENT_MODE_ID = "10" DATA_QUALITY_ID = "1" PROCESSING_LEVEL_ID = "3" ROSETTA:SCAN_MODE_ID = "0" - Unrecognized keywords: FRAME_PARAMETER_UNIT, EXPOSURE_DURATION_DESC, INSTRUMENT_TEMPERATURE_UNIT, SCAN_PARAMETER_UNIT - INST_CMPRS_NAME = "REVERSIBLE" is legal but vague. Many compression algorithms are reversible. - Some files have TELEMETRY_SOURCE_ID = "VIRTIS_EGSE_3" while others have TELEMETRY_SOURCE_ID = "VIRTIS_EGSE3" Assuming those identify the same thing, converge on one or the other. - A few files have negative vales for SCAN_PARAMETER, whose minimum is 0, e.g. data/stp043/virtis_m_ir/i1_00382567267.qub 6a.ro-c-virtis-2-esc1-mtp013-v2.0/document/ro_virtis_eaicd.lbl - ^PNG_DOCUMENT = ("IMAGE001.PNG","IMAGE002.PNG",...) should be ^PNG_DOCUMENT = {"IMAGE001.PNG","IMAGE002.PNG",...} because {} denotes an unordered set, as these are. 6a.ro-c-virtis-2-esc1-mtp013-v2.0/document/virtis_h_calibration.lbl - ^PNG_DOCUMENT = ("IMAGE010.PNG","IMAGE011.PNG",...) should be ^PNG_DOCUMENT = {"IMAGE010.PNG","IMAGE011.PNG",...} because {} denotes an unordered set, as these are. 6a.ro-c-virtis-2-esc1-mtp013-v2.0/document/virtisros_geometry.lbl - ^PNG_DOCUMENT =("FIGURE02.PNG","FIGURE03.PNG",...) should be ^PNG_DOCUMENT ={"FIGURE02.PNG","FIGURE03.PNG",...} because {} denotes an unordered set, as these are. 6b.ro-c-virtis-3-esc1-mtp013-v3.0/data/ - These values are illegal DECLINATION = -999.999 RIGHT_ASCENSION = -999.999 It is legal to replace the value with "NULL", "N/A", or "UNK" - SUFFIX_BYTES = 2 is illegal. It must be 4. - In object QUBE, required keywords are missing: BAND_BIN_CENTER, BAND_BIN_UNIT, BAND_BIN_ORIGINAL_BAND Those sit within a GROUP = BAND_BIN. - Values for non-numeric keywords can't begin with a digit, so INSTRUMENT_MODE_ID = 10 DATA_QUALITY_ID = 1 PROCESSING_LEVEL_ID = 3 ROSETTA:SCAN_MODE_ID = 0 should be INSTRUMENT_MODE_ID = "10" DATA_QUALITY_ID = "1" PROCESSING_LEVEL_ID = "3" ROSETTA:SCAN_MODE_ID = "0" - Unrecognized keywords: FRAME_PARAMETER_UNIT, EXPOSURE_DURATION_DESC, INSTRUMENT_TEMPERATURE_UNIT, SCAN_PARAMETER_UNIT - INST_CMPRS_NAME = "REVERSIBLE" is legal but vague. Many compression algorithms are reversible. - Some files have TELEMETRY_SOURCE_ID = "VIRTIS_EGSE_3" while others have TELEMETRY_SOURCE_ID = "VIRTIS_EGSE3" Assuming those identify the same thing, converge on one or the other. - A few files have negative vales for SCAN_PARAMETER, whose minimum is 0, e.g. data/stp043/virtis_m_ir/i1_00382567267.qub - Some files have a lower case v (for version) in DATA_SET_*, e.g. DATA_SET_NAME = "ROSETTA-ORBITER 67P VIRTIS 3 ESCORT 1 MTP013 v3.0" DATA_SET_ID = "RO-C-VIRTIS-3-ESC1-MTP013-v3.0"^ 6b.ro-c-virtis-3-esc1-mtp013-v3.0/data/*/cal/virtis_m_ir - CORE_ITEM_TYPE = "REAL" should be "PC_FLOAT" or "IEEE_FLOAT" as appropriate 6b.ro-c-virtis-3-esc1-mtp013-v3.0/data/*/geo/ - CORE_DESC is an invalid keyword. You could use DESCRIPTION 6b.ro-c-virtis-3-esc1-mtp013-v3.0/document/ro_virtis_eaicd.lbl - ^PNG_DOCUMENT = ("IMAGE001.PNG","IMAGE002.PNG",...) should be ^PNG_DOCUMENT = {"IMAGE001.PNG","IMAGE002.PNG",...} because {} denotes an unordered set, as these are. 6b.ro-c-virtis-3-esc1-mtp013-v3.0/document/virtis_h_calibration.lbl - ^PNG_DOCUMENT = ("IMAGE010.PNG","IMAGE011.PNG",...) should be ^PNG_DOCUMENT = {"IMAGE010.PNG","IMAGE011.PNG",...} because {} denotes an unordered set, as these are. 6b.ro-c-virtis-3-esc1-mtp013-v3.0/document/virtisros_geometry.lbl - ^PNG_DOCUMENT =("FIGURE02.PNG","FIGURE03.PNG",...) should be ^PNG_DOCUMENT ={"FIGURE02.PNG","FIGURE03.PNG",...} because {} denotes an unordered set, as these are. 6c.ro-virtis-5-v1.0/... - The dataset ID (and NAME) are badly formed DATA_SET_ID = "RO-VIRTIS-5-V1.0" 6c.ro-virtis-5-v1.0/catalog/dataset.cat - This reference is unknown. REFERENCE_KEY_ID = "FILACCHIONEETAL2016" EN does have REFERENCE_KEY_ID = "FILACCHIONEETAL2006" which is "On-ground characterization of Rosetta/VIRTIS-M, ... doi:10.1063/1.2360786, 2006." If this is a different reference, please add it to ref.cat. 6c.ro-virtis-5-v1.0/data/.../*.lbl - These values should be numeric, so MAXIMUM_LATITUDE = "90" MINIMUM_LATITUDE = "-90" EASTERNMOST_LONGITUDE = "0" WESTERNMOST_LONGITUDE = "360" should be MAXIMUM_LATITUDE = 90 MINIMUM_LATITUDE = -90 EASTERNMOST_LONGITUDE = 0 WESTERNMOST_LONGITUDE = 360 - Keywords SPACECRAFT_CLOCK_START_COUNT and _STOP_ are required but missing 6c.ro-virtis-5-v1.0/data/map/virtis_m/wi01_glb_m014_v01.lbl & maybe others - Line 49: ROW_BYTES = 27 should be 26 - Line 57: BYTES = 6 should be 7 - Line 69: BYTES = 5 should be 7 - Line 81: BYTES = 7 should be 8 7*.ro-x-hk-3-*/data/.../*.lbl - DATA_SET_NAME in the product labels have values "ANTENNAS" "AOCS" "EDAC" "HGA" "IMP" "NAVCAM" "OCM" "RWL" "SOLARARRAY" "STARTRACKER" when they should match their catalog/dataset.cat, e.g. "ROSETTA SPACECRAFT RF ANTENNA ENGINEERING DATA V1.0" "ROSETTA SPACECRAFT ATTITUDE & ORBIT CONTROL SYSTEM DATA V1.0" ... - Required but missing keywords: INSTRUMENT_HOST_ID INSTRUMENT_NAME TARGET_NAME SPACECRAFT_CLOCK_START_COUNT SPACECRAFT_CLOCK_STOP_COUNT 7a.ro-x-hk-3-antenna_status-v1.07a./browse/browinfo.txt - DATA_SET_ID = "RO-X-HK-3-ANTEANNA_STATUS-V1.0" should be DATA_SET_ID = "RO-X-HK-3-ANTENNA_STATUS-V1.0" 7g.ro-x-hk-3-ocm_rcs-v1.0/browse/ocm_accel_meas_2014_q1.png 7g.ro-x-hk-3-ocm_rcs-v1.0/browse/ocm_est_dist_torques_2014_q1.png 7g.ro-x-hk-3-ocm_rcs-v1.0/browse/ocm_estim_trans_vel_2014_q1.png 7g.ro-x-hk-3-ocm_rcs-v1.0/browse/ocm_impulse_meas_2014_q1.png - The labels for these files are missing